Classified Listings

Find jobs, housing, for sale, personals, services, local community, and events.

USA Online local classifieds

Jobs - Engineering / Architecture classifieds in houston

<![CDATA[We currently have four openings for Senior Procees Engineers in Houston, TX and have a need for one in Media, PA. Duration: 6 plus months Specific Requirements: The Sr. Engineer is expected to utilize his/her expertise in the area of process design and analysis to deliver quality projects to Siemens’ customers. These projects focus on process safety management with particular emphasis on the area of pressure relief systems. Candidate will determine the limitations and capabilities of process units and their pressure relief systems and recommend actions or mitigation plans. The Sr. Engineer will work with a team of process engineers under the direction of a Project Manager to deliver projects of a consistently high quality to our domestic and international customers. The Sr. Engineer will work directly with end users on technical aspects of the projects and therefore must be able to communicate technical requirements and deliverables clearly and concisely. The successful candidate will have proven experience in process system design and analysis. Experience in the area of upstream, midstream and downstream oil and gas processes including refining is a plus. Proven experience in common refinery and chemical processes is also desirable. Desired experience includes: - Flare Gas Recovery Unit Design (Must have) - Flare Consolidation Projects - Flare header analysis - Pressure Relief Analysis The Sr. Process Engineers expected to be proficient in the following tasks: Performs engineering calculations associated with pressure relief system design/analysis with emphasis placed on quality of work product & work efficiency. Identifies overpressure scenarios for various types of process equipment. Calculates relief loads for various types of overpressure scenarios. Evaluates pressure relief device capacities. Utilizes process simulation tools. Performs relief header & flare analysis. Presents results to clients. Mentors and performs quality check s for less-experienced personnel about overpressure concepts. Participates in overpressure concepts training for the less-experienced personnel & clients. Provides new design specification &/or action plan preparation after receiving process hazard concerns from clients, so that the clients can operate in compliance with the regulations. Develops overpressure simulations or heat & material balances using process simulation tools. Interprets data from piping & instrument diagrams, process flow diagrams, plot plans, piping isometrics, mechanical design information, typical unit operation specifications, & electrical one-line diagram. Collects mechanical design information & typical unit operation specifications Requirements: Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or related field Five plus years of experience in an alternate occupation or any suitable combination of education, training, and experience. Basic – Chemical Engineering degree Other Degrees – Petroleum Engineering, Process Engineering Keywords/Phrases idela canddiate will be familiar with: API 520 API 521 API 2000 Pressure relief analysis Relief valve sizing Over Pressure Flare sizing Flare networks Relief Audit Safe Guarding Relief design Positive additions to the keywords HAZOP LOPA Refinery Experience/exposure Heat and Material Balance OSHA Mitigation (Risk) QA (Quality) – Review others work Positive Software additons Berwanger or PPM or Pressure Protection Manager Aspen Hysis Pro II Flare Net Visual Flow Flare Sim iPRSM (From IMES Engineering – Part of Curtis Wright) IOMOSAIC/SUPERCHEMS Any of the above may not be the best fit with the following Large amounts of FEED work Large amounts of design rather than implementation Large amounts of time outside the chemical/process engineering area EXAMPLE Large amount of over pressure analysis for FEED study. This tends to indicated they have looked at Fire scenarios only – this is the easiest part of what we do, so they will most likely not have the experience. Possible screening question basis (These are to be used as a guide) 1) Explain in more detail how much/how many pressure relief calculations they have done? (1 or 2 is not many – experienced engineers should be so much higher numbers.) 2) What type of scenarios – fire, blocked outlet, overfill, pump/comp failure, reactors (Are a few good areas here) 3) Are they familiar with using on a daily basis API520 and 521? (Anyone with the experience we are looking forward should have some knowledge of these, the more the better) 4) Have they used software such as Hysis and Pro II (said Pro two)? How often? (They should be using it on a semi regular basis and being reasonably competent with them.) 5) Are they familiar with Risk mitigation for over pressure scenarios? How much exposure do they have? (Experienced engineers should have lots.) Preferrred candidates willl have experience from our competitors For consideration please reply to this posting with a resume.]]>

<![CDATA[Established surveying company seeks full time Crew Chief that has experience with ALTA's working independently utilizing Trible S6 robotic survey instrument. Position will require travel. Compensation package includes competitive salary, vehicle, health, dental, 401K, and more, EOE. Interested parties can email resume to scottscpa@yahoo.com. ]]>

<![CDATA[<center><img src="https://nexant.hodesiq.com/images/hdr_nexant_logo.gif"></center> Nexant, Inc. is a provider of intelligent grid software and clean energy solutions to Fortune 500 companies, utilities, transmission and distribution system operators, chemical and petroleum majors, financial institutions, government agencies, and development banks. Headquartered in San Francisco, Nexant has a global presence with 24 offices around the world. We are currently seeking a Project Manager in energy efficiency, energy management, and green buildings applications for our Houston, TX office. Duties and Responsibilities <ul> <li>Manage three to six full time engineers</li> <li>Maintain quality control of all deliverable products, demonstrating technical excellence, objectivity, and clarity while maintaining project schedules</li> <li>Meet with clients to co-manage projects, present results, and develop new scopes of work</li> <li>Develop new business opportunities Meet overall budget and profitability targets </li></ul> Experience and Education <ul> <li>Master's degree or Ph.D. in mechanical, architectural, electrical or civil engineering or sustainable building practices</li> <li>Minimum of 6 years experience within the utility, energy efficiency, or building efficiency industry</li> <li>Demonstrated ability to manage multiple projects while meeting deliverable deadlines and budgets</li> <li>An understanding of building systems (particularly HVAC), thermodynamics, and heat transfer</li> <li>Excellent technical, analytical, written, verbal, presentation, and interpersonal skills</li> <li>P.E. preferred</li> <li>Local industry contacts in Texas are a plus</li> <li>LEED certification and/or building simulation experience are a plus</li></ul> Salary and Benefits (U.S.) Nexant offers competitive salaries based on candidate's qualifications. Nexant also offers three weeks paid vacation per year, eleven paid holidays per year, a 401(k) plan with employee matching funds and an overall comprehensive benefits package. Nexant, Inc. is an equal opportunity employer and encourages workforce diversity. We welcome applications from all qualified candidates. Interest applicants should apply to the following link: <a href="https://nexant.hodesiq.com/job_detail.asp?JobID=1791021&user_id=" rel="nofollow">https://nexant.hodesiq.com/job_detail.asp?JobID=1791021&user_id=</a> To learn more about Nexant and for a list of all current employment opportunities, please visit <a href="http://www.nexant.com/" rel="nofollow">www.nexant.com</a>. ]]>

<![CDATA[<center><img src="https://nexant.hodesiq.com/images/hdr_nexant_logo.gif"></center> Nexant, Inc. is a provider of intelligent grid software and clean energy solutions to Fortune 500 companies, utilities, transmission and distribution system operators, chemical and petroleum majors, financial institutions, government agencies, and development banks. Headquartered in San Francisco, Nexant has a global presence with 24 offices around the world. We are currently seeking experienced Senior Project Engineers for our Houston, Texas office. Successful candidates will be responsible for leading technical efforts and support with project management tasks in the area of energy efficiency and building systems for our Energy and Carbon Management business unit. Duties and Responsibilities <ul><li>Conduct energy audits of commercial and industrial facilities to identify energy efficiency, load control, and distributed generation opportunities</li> <li>Perform and review energy savings calculations.</li> <li>Conduct site visits to verify installation and operation of baseline and replacement energy using equipment.</li> <li>Communicate efficiently with subcontractors and clients.</li> <li>Write reports to summarize results and to recommend savings amounts and incentive payments.</li> <li>Participate in business unit management, marketing, and business development for Nexant's Energy and Carbon Management business unit.</li> <li>Manage multiple projects, ensuring quality of deliverable and completion of project on time and within budget.</li> <li>Assign tasks to project team members and provide advanced technical direction to junior staff.</li> <li>Manage client and future client interactions and relations. </li></ul> Experience and Education <ul><li>Master's Degree or Ph.D. in mechanical, architectural, electrical, or civil engineering strongly preferred; P.E. strongly preferred.</li> <li>From 4-6+ years of experience within the energy efficiency or building efficiency industry</li> <li>Advanced technical knowledge and understanding of building systems (particularly HVAC), thermodynamics, heat transfer, trends in energy efficiency programs, and project management and consulting methods and practices</li> <li>Thorough understanding of HVAC system is desired</li> <li> <li>Excellent writing, interpersonal, and analytical skills</li> <li>P.E. and C.E.M. (or on track to receive) is desirable</li> <li>Experience in energy modeling and energy audits strongly desired</li></ul> Salary and Benefits (U.S.) Nexant offers competitive salaries based on candidate's qualifications. Nexant also offers three weeks paid vacation per year, eleven paid holidays per year, a 401(k) plan with employee matching funds and an overall comprehensive benefits package. Nexant, Inc. is an equal opportunity employer and encourages workforce diversity. We welcome applications from all qualified candidates. Interest applicants should apply to the following link: <a href="https://nexant.hodesiq.com/job_detail.asp?JobID=1792785&user_id=" rel="nofollow">https://nexant.hodesiq.com/job_detail.asp?JobID=1792785&user_id=</a> To learn more about Nexant and for a list of all current employment opportunities, please visit <a href="http://www.nexant.com/" rel="nofollow">www.nexant.com</a>. ]]>

<![CDATA[<center><img src="https://nexant.hodesiq.com/images/hdr_nexant_logo.gif"></center> Nexant, Inc. is a provider of intelligent grid software and clean energy solutions to Fortune 500 companies, utilities, transmission and distribution system operators, chemical and petroleum majors, financial institutions, government agencies, and development banks. Headquartered in San Francisco, Nexant has a global presence with 24 offices around the world. We are currently seeking experienced Project Engineers for our Houston, Texas office. Successful candidates will be responsible for providing technical engineering support for our Energy and Carbon Management business unit. Specific responsibilities will include: conducting energy audits, analyzing utility bills, performing energy engineering services for utility and end-use clients, reviewing electric energy efficiency and re-commissioning projects, conducting onsite field inspections, installing field monitoring equipment, conducting investment grade audits, and other related tasks. Duties and Responsibilities <ul> <li>Conduct energy audits at Commercial and Industrial facilities to identify energy efficiency measures </li> <li>Perform and review energy savings calculations</li> <li>Conduct site visits to verify installation and operation of baseline and replacement energy equipment </li> <li>Assist project managers in preparing cost proposals for potential utility sponsored energy efficiency programs</li> <li>Communicate effectively with clients and subcontractors </li> <li>Write reports to summarize results and to recommend savings amounts and incentive payments </li></ul> Qualifications <ul><li>Bachelor's or master's degree in mechanical engineering, electrical engineering, architectural engineering, or a related field</li> <li>Requires two years of work experience in the energy efficiency industry. Must also possess coursework or experience background with HVAC building systems, energy management control systems, and energy modeling</li> <li>An understanding of building systems (particularly HVAC), thermodynamics, and heat transfer</li> <li>Excellent writing, interpersonal, and analytical skills</li> <li>P.E. and C.E.M. (or on track to receive) is desirable</li> <li>Energy audit experience is desirable</li> <li>Hands-on experience with mechanical, electrical, and control systems is a plus</li> <li>Experience in energy modeling is a plus</li></ul> Salary and Benefits (U.S.) Nexant offers competitive salaries based on candidate's qualifications. Nexant also offers three weeks paid vacation per year, eleven paid holidays per year, a 401(k) plan with employee matching funds and an overall comprehensive benefits package. Nexant, Inc. is an equal opportunity employer and encourages workforce diversity. We welcome applications from all qualified candidates. Interest applicants should apply to the following link: <a href="https://nexant.hodesiq.com/job_detail.asp?JobID=1792788&user_id=" rel="nofollow">https://nexant.hodesiq.com/job_detail.asp?JobID=1792788&user_id=</a> To learn more about Nexant and for a list of all current employment opportunities, please visit <a href="http://www.nexant.com/" rel="nofollow">www.nexant.com</a>. ]]>

<![CDATA[LoneStar Marine Shelters is a custom fabrication company specializing in manufacturing Offshore Living Quarters.We offer an excellent compensation package with an easy commute to Galveston, Texas. Auto Cad Structural Steel detailing experience, 3+ Years required. Duites include dvelopment of Structural Steel detail drawings from Structural Steel Engineering calculations. Familiar with Welding Symbols, USCG and ABS specifications a plus. Please send your resume to: stevev@lonestarmarineshelters.com LoneStar Marine Shelters (409) 941-1200 6800 Harborside Drive Galveston, Texas 77554 ]]>

<![CDATA[Saudi Aramco is offering following positions for its Training Center. Please send your CV asap. Saudi Aramco managers will interview applicants in Houston in April. US citizen Male applicants only. *10 Years experience as a pipefitter fabricator in the oil & gas/petrochemical industry, Must read fabrication drawings isometric & orthographic projections, able to develop material lists and fabrication templates for the projects. * Plans work assignments to determine materials, equipment, and tools requirements to determine materials, equipment, and tools requirements in fabricating threaded, welded and non-metallic pipe spool fabrication. * Cut, threads, bends joints, and assembles pipe for fitting and fabrication (Ferrous/Non Ferrous/Non-Metallic). * Cut, prepares, bends, and drills plate for fabrication. *Perform Hydrostatic testing of pipe spools. Knowledge of rigging equipment and procedures helpful.]]>

<![CDATA[ Saudi Aramco is offering following positions for its Training Center. Please send your CV asap. Saudi Aramco managers will interview applicants in Houston in April. US citizen Male applicants only. *10 Years experience working in Oil % Gas or petrochemical plants as rotating equipment specialist. *Experience in disassembly and repair of large gas compressors & motor/air operated valves, steam/gas turbines. *Repair of heat exchangers, boilers, vibration analysis and or laser alignment skill required.]]>

<![CDATA[Saudi Aramco is offering following positions for its Training Center. Please send your CV asap. Saudi Aramco managers will interview applicants in Houston in April. US citizen Male applicants only. *10 Years experience in Class 1, Division 1, Oil & Gas Petrochemical Plants, supporting maintenance and installation of large electrical rotating and distribution equipment. Medium and high voltage experience required. * Able to troubleshoot and repair electro-mechanical, and electronic systems and components, using electrical/ electronic, current injection test equipment, schematics and one line diagrams. * Experience in the repair of UPS, ESD, MOV, battery charging equipment, Able to interpret logic diagrams. * Process Instrumentation drawings and instrumentation loop diagrams helpful.]]>

<![CDATA[ Saudi Aramco is offering following positions for its Training Center. Please send your CV asap. Saudi Aramco managers will interview applicants in Houston in April. US citizen Male applicants only. *10 Years experience as oil &gas well operator, driller tool pusher, rig Foreman. *Land based, jack up, fixed or mobile, off shore drilling experience Applicable, Work over, down hole recovery, cementing and directional Drilling work experience necessary. * Knowledge of sour gas operations required. ]]>

<![CDATA[We are currently seeking a Director of Engineering & Construction for a client in the energy and pipeline industry located in the Houston area. This position will be responsible for the development of large scale, fixed asset growth projects that will provide direct supervision and leadership to engineering and construction. Responsibilities * Will serve as Director for multiple large scale engineering projects ( value management strategy, risk assessment, mitigation planning, permitting, engineering, construction, and project management framework) * Manage budgeting, financial, and business reporting processes for multi million dollar projects * Work within a five stage asset development process * Responsible for preparation and maintaining project plans and report projects status * Develop complex large scale project contracts including price negotiation, scope of work, terms and conditions, and risk analysis required for engineering, construction activities, services, and land acquisitions Qualifications * Bachelor of Arts or Science in Engineering (Civil, Electrical, or Mechnical) * 15 + years of energy and engineering project management experience * 8+ years of directly leading project planning and implementation * Professional Engineer License or Project Management Institute (PMI) certification would be a plus * Experience in salt dome or reservoir natural gas or hydrocarbon liquid storage development or operations would be a plus * Relocation is being offered for this role]]>

<![CDATA[Engineering Partners Inc. is currently seeking a full time Electrical Engineer to join our team in Hilo, Hawai‘i. Candidate must have minimum 10 years experience, BS degree or higher in Electrical Engineering & be a licensed Professional Electrical Engineer in the State of Hawai‘i. Be proficient in AutoCAD and Microsoft office. Design experience in building, industrial systems, MCC’s, utilities, telephone, cable, etc. Prospective candidate must be motivated, self, starting, resourceful and willing to work long hours. Engineering Partners, Inc. (EPI) is a Hawai‘i based consulting engineering firm located in Hilo, Hawai‘i. Our team consists of professional engineers, designers, and technicians. EPI provides professional services in Civil Engineering, Mechanical Engineering, HVAC Engineering, Fire Protection, Structural Engineering LEED, Construction Management and Land Surveying. Our specialization includes but is not limited to commercial, municipal, institutional, multi-family residential, single family residential, environmental and industrial projects. We offer a competitive salary and benefits package including health, dental, vision, profit sharing and more! Please attach a detailed resume and cover letter and reply by email to: contact@epihawaii.com. ]]>

<![CDATA[MD Madison Construction LLC a General Construction Contracting Company is seeking a Residential and Commercial Construction (PROJECT) Estimator. The applicant must have at least 2 years verifiable construction (PROJECT) estimating experience. Applicant must also have outstanding communication and interpersonal skills.]]>

<![CDATA["MapInfo" is a GIS mapping program. If you do not know what "MapInfo" is. Please do not reply to this ad. If you are an expert in MapInfo, AutoCAD, MS Excel, and fully understand computers. If you understand outside plant in the telephone industry. If you are a self starter and can produce without supervision. No benefits, no vacation, no holidays. The job will pay enough for you to cover all your own expenses. Please respond to this ad with your resume. Thanks, Larry]]>

<![CDATA[Saudi Aramco is offering following positions for its Training Center. Please send your CV asap. Saudi Aramco managers will interview applicants in Houston in April. US citizen Male applicants only. Instrument Technician Trainer *10 Years experience maintaining process control systems in Oil/Gas Industry with at least 5 years working with DCS (Yologawa, Honeywell TDC 3000/Foxboro/Delta V) and PLC (Triconex/Siemens/Allen Bradley/Bristol Babcock). * Ability to maintain compressor controls, turbine controls, foundation Field bus and plant wide networks. *Repair of gas analyzers a plus.]]>

<![CDATA[Saudi Aramco is offering following positions for its Training Center. Please send your CV asap. Saudi Aramco managers will interview applicants in Houston in April. US citizen Male applicants only. *10Years Oil & Gas or Petrochemical Safety Engineer with past Experience conducting incident investigations and root cause analysis. *OSHA / NEBOSH certification required. * Previous experience evaluating erection of: On/off shore scaffolding, work permit procedures, hazardous materials handling, crane safety, drilling operations, helicopter safety, able to effectively communicate in English to all levels of management via written technical reports and presentations.]]>

<![CDATA[ Custom Design Pools is looking for a part time Landscape Architect. The position entails sales, design and management of high-end residential pools, landscaping, structures, etc. Position could very well turn into full time with pay potential to be over $75,000. If you are interested please reply to this listing with a resume. To learn more about Custom Design Pools and see our work visit www.cdphouston.com. Some exterior design experience needed. ]]>

<![CDATA[I am a freelance mechanical engineer specialized in Piping Stress Engineering with broad piping design and construction engineering experience. As principal consultant piping engineer, I have carried out detailed piping design/stress engineering duties/analysis involving pressure vessels, rotating equipment, pipelines and piping networks (using Caesar II & AutoPipe (Plus)) on brown field projects and green field projects for Oil & Gas engineering companies (especially on behalf of ExxonMobil, Jacobs Engineering, Williams Pipeline, Enterprises Partners, ENI petroleum, British Petroleum, etc) within USA (in Texas, South Carolina, Alaska, Colorado etc), Canada & Africa. Clashes within your 3-D models /platforms /modules would be troubleshoot & repair. I have also lead mechanical engineers and piping designers to develop and deliver: basis of design, Front Engineering resources forecast, conceptual 2-D/3-D drawings & ISO, reports, construction/Installation procedures, B.O.M. / M.T.O and stress ISOs. I am also into detailed design/stress analyses for Piping/pipeline Supports and risers. If you require recommendation or references, please send your request. Certifications for jobs /stress calculations were treated accordingly. I am available for immediate job placement, short term or long term. Email address: mechasolutions@yahoo.com Contact Phone number : 907-602-3343 & 281-716-3733 Olu’Femi]]>

<![CDATA[We are a boutique residential firm prospering in today's economy in need of two rock-star designer/architects as soon as possible! TO BE CONSIDERED MUST: Be capable of functional and creative design Have excellent CAD production skills. Have 5 + years of comparable experience in residential design. Send resume, contacts, and portfolio via PDF or web link only. AIA license preferred but not mandatory. ]]>

<![CDATA[RABA-KISTNER SUCCESS STARTS WITH OUR PEOPLE If you are looking for a chance to shape your own future as an engineer, architect, environmental professional, or construction materials engineering technician, we want you at Raba-Kistner. Raba-Kistner is a place where your work is challenging and your performance is rewarded. People are Raba-Kistner's most valuable asset. Raba-Kistner is known industry-wide for its knowledgeable and experienced professionals, and the creative solutions they possess for our projects. Our clients select Raba-Kistner because of our staff, their expertise and dedication. Client service sets us apart from the competition. The success of Raba-Kistner will continue to be fueled by the motivation and drive of the people we hire and the skills and visions they develop. If you are interested in growing and working on a highly diverse, energetic and dedicated team, Raba-Kistner offers that and much more. No matter what your expertise, there is a way to apply your skills at Raba-Kistner. LIFE AT RABA-KISTNER We use the best combination of all of our talents to meet and exceed our customers' needs. The culture of any company is difficult to put into words, since it must be experienced to be appreciated. Culture is a key consideration when joining an organization, since it can support your development and contribute to your success. Raba-Kistner has a unique culture built on our people and the personal relationships of employees at all levels of the organization. These relationships are built on trust and a strong work ethic. Employees comment about the excellent personal relationships within their departments and throughout the company. We offer you an excellent working environment that will support you and enable you to do your job. You'll gain satisfaction from working with a quality team and a company with an outstanding reputation. One of the advantages of working for Raba-Kistner is the chance to continue learning and mentoring throughout one’s professional life. Raba-Kistner’s mentoring programs give entry-level professionals a chance to learn and grow, while extensive training and development programs help professionals at all levels keep their skills sharp. Raba-Kistner is large enough to compete for and win significant projects but small enough to maintain excellent customer service and produce a superior product. Individuals can make a difference in their jobs and contribute toward the bottom line. We thrive on exciting and challenging projects. Long-term clients keep coming back because of our quality service and outstanding people. We're continuing to grow and are looking for staff with technical and leadership skills that can help lead us into the future. Environmental Professional Houston, Texas The position of Environmental Professional requires a diverse background in the Environmental Consulting field including experience with, geology, Phase I and II Environmental Sites Assessments, and NEPA-related environmental documents and permits. The position requires a minimum of ten (10) years of applicable experience and recognizable technical expertise. In this capacity the Professional’s responsibilities encompass supporting a successful business practice in R-K’s Houston operation. In this role the Professional shall be assigned project management responsibilities ranging from scope development, budget and proposal preparation, short list interviews, engineering and production work, project/client meetings, project site visits, invoicing and accounts receivable collection, and business development The Professional actively participates in the day-to-day environmental business in Houston including planning, staffing and execution of various projects. The Professional shall also possess good communication and interpersonal skills in dealing with subcontractor drilling companies, building occupants, fellow Raba-Kistner employees, clients and the general public. Provides support for geoscience and environmental engineering projects including the acquisition of field data, analysis and solutions of geological and environmental monitoring problems and preparation of reports. Prepares reports, maps, tables, etc. in support of various work products. The Professional is expected to lead by example and set high standards for creativity and inter-office and intra-office cooperation and assist in developing and maintaining staffing levels and competencies consistent with the department’s type of work and volume. The ability to promote and develop new business opportunities is essential to this position. Bachelors in a scientific or engineering field; minimum 10 years applicable experience. Has direct experience in conducting Phase I ESAs in accordance with ASTM Standard E- 1527. Has direct experience in conducting a variety of geoscience-related project activities. Has direct experience in Environmental Planning and Permitting services. Raba-Kistner recognizes that our employees are our most valuable asset and their efforts make us successful. We recognize that all aspects of compensation, including salary and benefits, need to be considered in order to attract and retain talented employees. • Major Medical/Prescription • Flex Spending • Dental • Life Insurance & Accidental Death & Dismemberment • Short and Long Term Disability • 401 (k) Contributory Retirement Program • Paid Holidays, PTO, Workers’ Compensation Insurance • Direct Deposit Employee development is one of Raba-Kistner’s key values. Full-time employees are eligible for tuition assistance for job-related college level courses, or courses helpful to an individual’s progression within the company. To maintain a competitive position within our industry, Raba-Kistner continuously benchmarks and evaluates our programs to ensure competitiveness. As such, we strive to differentiate pay based on performance and reward high performers. Raba-Kistner is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color religion gender, or national origin. Females and minorities are encouraged to apply. ]]>

<![CDATA[Minumum 2 years Estimating/Project Managemnet Experience Required. Houston Company seeking an intelligent, ethical Team Player who is detail oriented and diligent. Estimating, compiling bids, maintaining job folders, preparing submittals and working as a Project Manager with manufacturers and contractors. Background checks and drug screening mandatory. EOE.]]>

<![CDATA[PURPOSE OF POSITION: · Assists in construction inspection for a variety of projects. ESSENTIAL FUNCTIONS: · Attends various meetings as needed related to construction projects. · Answers inquiries and complaints from residents. · Becomes thoroughly familiar with the plans and specifications for the job to be inspected. Checks materials before installation. Points out potential problems to the contractor and project engineer, and keeps project engineer and supervisor informed of progress of project. · Responsible for job specific quality system tasks as defined in quality manual. ESSENTIAL JOB REQUIREMENTS: · At least 5 years of progressive experience with infrastructure projects including water, wastewater, drainage and paving, land development, underground utilities, large dirt work. · Experience with plan and profile drawings, unit cost administration water and wastewater treatment plants a plus.. · Must be able to be a good communicator. · Must be able to read and understand construction plans, blueprints and maps. · Must be able to follow and carry out specific instructions on an independent basis. · Must have basic math skills to compute quantities and costs when requested. · Must be able to interpret and implement company mandated safety policies. · Must have an ability to operate a level and have an understanding of cut and fills and elevations for grades. · Must know how to scale and measure distances. Must obtain measurements and report progress information and place on an Inspector's Daily Report (IDR). ]]>

<![CDATA[Need a Mechanical Reliability Engineer and Project Engineer Mechanical Reliability Engineer Degree and Refrigaration and rotating equipment experience a must EPA cert and familiar with environmental rules and regualations pertaining to refrigeration equipment Need to be able to calculate equipment vibration Has to be able to handle multiple projects, good people skills, team player, motivator with good written skills Project Engineer Must be able to manage projects and help develop the schedule, safety in design, technical scope, cost management. Project exp needs to be over 10M and must know mechanical, PCT, CSA, accounting, piping, cost, schedule and QA/QC knowledge. Degree is a must and experience in the Chemical industry is required. These positions need to be filled asap. Drug screening and background check will be performed along with good references. ]]>

<![CDATA[We are looking for an experienced Revit operator responsible for producing residential drawings. Qualified candidate should be detailed oriented and able to work with minimum supervision. Only experienced candidates and only local candidates please. Part-time position with a possibility of becoming a full time position in the next 6 months.]]>

<![CDATA[General contractor specializing in interior build-outs of offices, retail stores and restaurants is seeking to fill a full time position for an Assistant Project Manager. Candidate must have a college degree in Construction Management or Architecture, must have excellent skills in computers, customer service and written and oral communication. Must have a valid driver's license and must be capable of occasional travel out-of-state.]]>

<![CDATA[POSITION TITLE: Sales Engineer LOCATION: Houston, TX REPORTING RELATIONSHIP: Reports to Sales Manager OUR COMPANY: URETEK ICR, Gulf Coast is a Houston based specialty contractor that serves the Municipal, Utility, Industrial, Commercial and Residential markets utilizing highly specialized technology and patented materials within exclusive territorial jurisdictions to repair, rehabilitate, maintain, or improve: 1.) infrastructure systems consisting of underground and surface drainage systems for wastewater, storm water, fresh water, and industrial effluents. 2.) Concrete foundations, slabs and structures including piers, footers, slabs, floors, driveways, etc. 3.) Load bearing soils by densifing, consolidation, strengthening, etc. SCOPE AND RESPONSIBILITIES: The Sales Engineer will be responsible for sales in the Gulf Coast region within a market segment. Responsibilities: • Conduct needs analyses with prospective clients and/or client’s technical representatives in order to gain understanding of their critical issues. • Articulate the value of the Company’s technology to meet prospective client’s critical needs • Develop client proposals and quotations. • Negotiate and close sales. • Conduct technical presentations, training sessions, and seminars for Engineering and/or Customer Groups. Typically, from 5 to 50 people. • Develop new applications and target new clients. • Develop and maintain client relationships. • Develop sales strategies and annual sales budgets. • Meet or exceed sales goals as agreed to with management. • Provide sales forecasts and contact data as required by management. • Liaise with operations group to assure full understanding of project and to assure client’s expectations are met. • Leverage relationships within organizations to solve technical hurdles and foster awareness of products and solutions. • Interface with various clients at both a business and technical level and propose/recommend solutions to their critical issues. EXPERIENCE REQUIRED: • The ideal candidate will have a technical sales and/or construction background. • Five or more years of sales either within an engineering firm, public entity or relevant construction company. • Ability to create a sales strategy with a proven track record of execution. • Excellent listening skills resulting in a high level of customer satisfaction. • Willingness to travel as necessary. • Good communication skills, both verbal and written. • Must be able to understand engineering processes. • Aptitude toward a variety of engineering disciplines. PERSONAL ATTRIBUTES: • Energetic self-starter with strong leadership skills. • Entrepreneurial, organized, agressive and results driven. • Excellent communication and quantitative skills. • Strong interpersonal skills and an ability to work well with all functions and/or levels. • Quick learner. Able to understand complex issues. • High attention to detail. EDUCATION: Engineering or Technical Degree. PE a plus. Construction background desirable. CONTACT: Interested candidates should email a copy of their resumes to: evs@uretekicr.com. Please include a daytime phone number. Ev Stephen Sales Manager URETEK ICR Gulf Coast 11603 Windfern Houston, TX 77064 Email: evs@uretekicr.com Direct: 832-434-4209 Fax: 281-720-1222 ]]>

<![CDATA[Do you want to help a small company make a BIG difference in space? Do you take ownership of your job and responsibility for your actions? Then come work for Red Canyon and help us continue our mission of helping humankind reach the stars! Red Canyon is seeking a self-motivated, detail oriented, goal driven individual to be an Engineering Checker for Orion CM Mechanical subsystem product team. After reading the below requirements and responsibilities, if you feel you are the perfect candidate, please email your Word formatted resume and cover letter that details how your experience and education are a perfect match for our requirements. In the cover letter please include your salary requirement. Thank you! Description: Engineering Checker to support Orion CM Mechanical subsystem product team. This position shall perform checks of Orion Crew Module (CM) secondary structure drawings and assemblies to ensure conformance to drawing and industry standards (ASME Y14.5) for the CM Mechanical subsystem product team. Acceptance criteria will be based upon predetermined industry and processes for drawing check. This position will perform drawing check and contribute to drawing release per product team detail schedule. Work location Houston, Texas. Experience Includes: ** CAD Model check experience specifically ProE Wildfire 3.0 ** Drawing check experience using industry standard ASME Y14.5 ** 10 years minimum checking experience ** 2 years minimum checking experience within the Aerospace industry ** Strong technical and communicative skills ** Self motivated, detail oriented, goal driven ** Passionate about space exploration Red Canyon Engineering and Software: "Exploring Other Planets, Improving Our Own" Red Canyon contracts with NASA, USAF, NREL, Lockheed Martin, LASP at CU Boulder, SEAKR Engineering and Ball Aerospace among others. We specialize in building spacecraft, developing renewable energy technologies to help make our planet a better world and cutting edge R&D. Our disciplines include systems engineering, mechanical design, structural analysis, real time flight and ground software, simulation software, user interface software and mission management software. We help our customers with the full life cycle of product development from requirements to test and delivery. Some of the programs we have worked on or are currently working on include Mars 98, Odyssey 01, Stardust, Genesis and Deep Impact, Mars Phoenix, Mars Reconnaissance Orbiter, Crew Exploration Vehicle - ORION, Lunar Reconnaissance Orbiter and the MarsFlight and LunarSIM Simulation. We also work on classified programs. Red Canyon is located in scenic Denver, Colorado. We are a small company that maintains a flat organization to decrease our overhead and costs to our customers. Our number one focus is to solve some of the most complicated engineering problems humankind is working on. We have a fun and talented team of engineers and we are committed to our engineers continued success and development. Included in our employment package are immediate health benefits, profit sharing, referral bonuses and a generous 401k retirement plan. Please send Resume and cover letter to: hr76@redcanyonsoftware.com ]]>

<![CDATA[<a href="http://www.exponent.com" target="_new" rel="nofollow">Exponent</a> is a leading engineering and scientific consulting firm. Our multidisciplinary team of scientists, engineers, physicians, and regulatory consultants brings together more than 90 different disciplines to solve complicated problems facing corporations, insurers, government entities, associations and individuals. Our approximately 900 staff members work in 24 offices across the United States and abroad. Exponent has over 600 consultants, including more than 350 that have earned a doctorate in their chosen field of specialization. Exponent’s <a href="http://www.exponent.com/careers/who_we_are/mechanical_engineering_and_materials_science_practice" target="_new" rel="nofollow">Mechanical Engineering & Materials Science</a> Practice has provided over thirty years of services related to the investigation and analysis of mechanical systems behavior for products ranging from aircraft and marine transportation to all types of industrial equipment and consumer products. Our engineers and scientists have understanding of all areas of mechanical engineering, including reliability and hazard evaluation, design assessment, fluid and thermal analysis, and materials life prediction. Exponent's metallurgists, polymer and corrosion scientists, electrochemists, and ceramists have many years of experience in the prevention and analysis of material failures. The Materials/Metallurgy group is currently seeking experienced candidates for a senior level consulting position as a Senior Managing/Principal Engineer, in our Houston office. As a Senior Managing/Principal Engineer you will have a significant role in developing business and expanding the practice in this technical and geographic area. Responsibilities for this position include:<ul><li>Identifying, developing, and securing new business opportunities</li><li>Significantly increasing Exponent’s materials and metallurgical consulting efforts</li><li>Analyzing a wide variety of materials failures using field inspections, engineering analysis and experimental testing</li></ul>Qualifications for this position include:<ul><li>Ph.D. in Metallurgical and Materials Engineering</li><li>Significant business development experience with a proven track record</li><li>The ideal candidate will be a recognized leader in their field with consulting experience and an established practice</li><li>Ability to attract projects to support full-time staff, and to manage and develop a group of highly motivated individuals</li><li>Excellent written and verbal communication skills, and the ability to work independently or in multidisciplinary teams</li><li>A record of professional papers and presentations, and a proven record of dedication to quality and accuracy</li></ul>For consideration, please apply online at <a href="http://www.exponent.com/careers" target="_new" rel="nofollow">www.exponent.com/careers</a> and reference “2558” as the keyword, or click here: <a href="http://jobs.exponent.com/ENG/candidates/default.cfm?szCategory=jobprofile&szOrderID=2558&szCandidateID=0&szSearchWords=&szReturnToSearch=1" target="_new" rel="nofollow">Application Page (2558)</a> Exponent provides healthy and competitive compensation, an excellent benefits package, including company-subsidized medical, dental, vision, life insurance, and a 401(k) Retirement Program, with a 7% company contribution. We are an Equal Opportunity Employer.]]>

<![CDATA[Summary of Position We require a Senior Electrical/Control Systems Engineer to support the design of projects that include power distribution and electrical controls. Job Responsibilities • Design power and controls for an industrial plant • Co-ordinate development of project with electrical and mechanical engineering • Prepare electrical control system layout, detailed drawings and schematics using AutoCAD/ePlan Electric • Prepare power distribution layouts and detailed drawings using AutoCAD/ETAP • Design PLC control system and programs • Onsite installation supervision • Debug overall control system processes during commissioning • Prepare and maintain project cost estimates and schedules • Prepare process/scope description documents. Knowledge and Skills: • Good inter personal and organization skills • Ability to perform in a team environment • Ability to conceptualize solutions and effectively communicate them both verbally and in writing. • Ability to take a project form design to commissioning • Ability to make decisions. • Well acquainted with CSA/NEC and other applicable standards. Sound problem solving skills using engineering practices • Experience in PLC and VFD systems • Experience in power distribution system planning and design • Experience with diesel powered electrical generation and synchronization equipment. • Knowledge of electrical equipment installation design e.g. panels, cable trays, sensors, etc. • Experience with containerized equipment design will be a benefit. Software Skills: • Good working experience in AutoCAD • Proficient in PLC programming Mitsubishi/GE/Siemens • Experience with Variable Frequency Drives setup • Proficient with databases e.g. MsAccess, Excel • Experience in electrical design software e.g. ePlan, AutoCAD Electrical is preferred • Experience in electrical analysis software e.g. ETAP/SKM is beneficial Work Environment: • Significant design work in the office • Traveling to job site for installation supervision, system startup and commissioning. Installation and commissioning activities will take place in heavy industrial environments with associated typical noise and dust exposure levels and construction safety hazards. • Must be willing and able to travel extensively, both local and internationally. International travel to third world countries may be required. Education and Experience: • Bachelor of Science/Engineering in Electrical or equivalent • 5+ years of experience]]>

<![CDATA[Duties & Responsibilities Provides technical support on DTS developed products. Performs conceptual design work and engineering analysis. Writes and reviews technical proposals and specifications. Interfaces with customers and project managers. Provides engineering status and progress reports. Performs product testing on and offshore. Qualifications BS in Mechanical Engineering with five (5) to ten (10) years of oilfield related experience. ROV and/or Subsea equipment design and engineering experience is preferred. To perform this job successfully, an individual should have knowledge of Microsoft Word, Excel, PeopleSoft, AutoCad, Solidworks. MS Project strongly preferred. ]]>

<![CDATA[Duties & Responsibilities Is deeply involved with the upfront planning, proposal, and development process. Communicates quality and performance requirements and expectations clearly to supply base and ensures that they are understood and adhered to. Validates supplier production processes prior to production or at initial run-off. Ensures suppliers are able to provide Detailed Quality Plans, working towards standardization. Leads continuous process improvement teams at the Houston campus as well as at supplier locations. Mentors cross-functional teams in the application of methodical problem solving processes at the Houston campus as well as at supplier locations. Develops, maintains, and effectively communicates Supplier metrics, both internally and to supply base. Quantifies, consolidates, and analyzes Supplier data and metrics. Supports and improves the NCR, CAR, PAR, Customer Satisfaction and Loyalty Assessment and customer complaint processes with regards to the supply base. Conducts supplier quality audits; systems, process, and product. Assists quality department with internal audits of processes. Ensures the independent product and component inspection function is in accordance with industry standards, regulatory statutes, and customer requirements. Reviews, approves and provides comment on specifications, drawings, plans and procedures. Establishes, reviews, approves and audits Quality Assurance /Quality Control requirements on procurement documentation. Prepares and troubleshoots nonconforming manufacturing and test documentation. Qualifications Associate’s or Bachelor’s degree in a related field preferred. Six Sigma or other advanced quality training a plus. Minimum five (5) years quality related experience in manufacturing, design, quality or supply chain. To perform this job successfully, an individual should have knowledge of Microsoft Office applications. Knowledge of MiniTab a plus. Must be knowledgeable in metal fabrication, ISO 90001:2000, quality audits, metrological instruments, inspection processes, SPC, TQM, document control, process change, and change leadership. ]]>

<![CDATA[Pulse Structural Monitoring is the leader in marine structural monitoring and has been responsible for the provision of highly successful monitoring systems and services since 1998. Currently Pulse Inc. in Houston, TX has an opening for a Subsea Systems Engineer. Suitable candidates should have a strong technical background and positive work aptitude for carrying out offshore installations of electronic and electrical instrumentation as well as mechanical equipment. The candidate should also have excellent written communication skills and should be confident in verbal communication with colleagues and clients through daily interaction. Candidates should be equally comfortable working onshore or offshore individually and as part of a project team. The candidate should be motivated to learn in a fast-paced and technically challenging work environment. Requirements are: • BS Electrical or Electronic Engineering • Strong electrical and microelectronic background • Work offshore on a team rotation schedule • Basic understanding of programming or versed in MatLAB or C/C# • Circuit board troubleshooting, repair, and/or production • Surface mount soldering • Familiarity with the use of electronics lab equipment • Strong communication skill Preferred experience in the following areas: • Offshore Experience, preferably in the installation of complex monitoring systems • Service, maintenance, and repair of electronic and electrical instrumentation equipment • Knowledge of industry standards and codes • Authoring technical procedures and/or specifications • Knowledge of sensor design(s) and applications The ideal candidate for Pulse will have 2-5 years of offshore or relevant experience. Knowledge of both electrical and mechanical systems is preferred and experience with offshore electronic equipment and instrumentation is a plus. Required Residency of Applicant: USA]]>

<![CDATA[Architectural designer/drafter with five years of post graduate experience available for small scale design work as well as providing drafting services for a variety of work including, but not limited to: general architectural drafting and 3D modeling, as-built documentation, and conversion of hard lined drawings to digital drawings. I am highly motivated and available for a variety of job types. Work will be completed thoroughly and efficiently. Please contact Pete at 832 754 3976 or by replying to this ad via email. Resume and work samples are available upon request. (To clarify, this is a posting offering my services, not seeking freelance employees)]]>

<![CDATA[Global Opportunities If you have entrepreneurial skills and are looking to put them to use in an international environment, consider contacting Global Corporate Careers. We represent prestigious U.S.-based employers who are looking to fill key positions in their international operations. Our clients seek individuals with significant experience living and working overseas, fluency in English and one or more foreign languages, a willingness to relocate, and strong interpersonal, written and verbal communications skills. Candidates with global experience in key industries such as Environmental, Oil & Gas, Manufacturing, Technology, Security and Telecommunications are in high demand. Minimum requirements include a Bachelor’s degree (advanced degrees a plus) and at least seven years of work experience demonstrating dedication, advancement and leadership. Interested candidates are invited to submit a resume online at www.GlobalCorporateCareers.com. We will contact individuals that match our clients’ requirements within three weeks of receipt of a resume. No fees involved. Representing equal opportunity employers. Due to an increase in the number of responses, please submit your resume only through our website. Thank you.]]>

<![CDATA[ <div> This is a contract position with the possibility of going full time in 6-8 months!  Software Experience: Autodesk Inventor Excel Adobe Acrobat 3d AutoCAD Dynamic block creation (AutoCAD) Data extraction (AutoCAD) 3d rendering (AutoCAD)   Duties: Create detailed shop drawings from 3d models conforming to drafting standards of millwork and metal fabrication. (Inventor) Assist in product development and design. (Inventor) Create 3d models of product offerings. (Inventor & AutoCAD) When required, 3d room layout renderings showcasing our product. (AutoCAD) Assist with research and sourcing items.   Education: Associates Degree minimum in Drafting and design. Experience: Min. 2 years experience. Manufacturing and millwork experience preferred.   If you have your own laptop or computer with Autodesk Inventor 2008 & AutoCAD 2008 you will be moved to the top for consideration!!!   Fax resume and hourly rate requirement to: 281-496-0075 No phone calls please!</div> ]]>

<![CDATA[Tom Gugger Independent Recruiter tgugger@bex.net Electrical Design Engineer (AC/DC Generators/Motors) This is a full time career position for an Electrical Design Engineer who has proven experience with the design of AC generators and/or alternators in the 5kw to 4,000kw range. This position is with a major company and located in central Wisconsin. The position includes reasonable relocation, excellent benefits, and a real opportunity to advance, working conditions are said to be excellent. If interested and qualified, email your resume to tgugger@bex.net. General Description and Responsibilities Primary •Electrical design of 4 pole AC generators / alternators. (within the size range of 5KW to 4000KW) •Understanding of material properties associated with electrical design •Experience in an industrial environment building generators. Experience with manufacturing generators •Responsible for initiating ongoing design/redesign activities for product enhancement and cost reduction •Experience with applying generators to customers’ applications •Provide technical and application support for generators •Familiar with standards that apply to generators such as NEMA and NEC •Familiar with the use and application of voltage regulators for generator applications. Secondary (all or some of the following) •Use magnetic finite element analysis to evaluate new motor design alternatives •Familiar with international standards for generators •New product development including permanent magnet machines •Perform simulations of generator systems including the voltage regulator, exciter and generator. •Familiarity with generator set controls Experience preferred: •Experienced with design for manufacturability •Familiar with the manufacturing processes for electric machines •4+ years experience in the design, application and manufacture of electric machines / generators •Exposure or familiarity with finite element modeling tools •Capable of managing multiple projects and priorities •Knowledge of test methods and standards for electric generators Educational qualifications •Strong theoretical knowledgebase •BS Electrical Engineering, or higher with emphasis on electric machines preferred ]]>

<![CDATA[Engineering Manager - Systems/Software Engineering Work Location: Interiors - Phoenix -----------> Relocation Assistance offered if needed Position Overview Because of a strategic commitment, Goodrich Corporation has initiated the creation of an Electronic Systems Center (ESC) headquartered in scenic Phoenix , AZ. The ESC will support a wide variety of Goodrich aerospace products with state-of-the-art facilities and expertise. The ESC team will design, test, build, and support electronic components and systems for all parts of the Enterprise . As Engineering Manager, you will be responsible to build an effective team of Systems and Software Engineers executing our avionics design commitments within the ESC. Primary Responsibilities: Execution of Engineering Projects: - Builds, develops and manages the Systems and Software engineering resources of the global ESC team in Phoenix , AZ to effectively meet customer requirements. - Establishes design requirements traceability, flow down requirements, develop and test - Develops complex sub-system trade studies, algorithms and error budgets. - Positions engineering team to execute value engineering, new product introduction, or existing product transfer to lost-cost sourcing and manufacturing areas. - Drives the usage of appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse and knowledge-management. - Reviews the content, thoroughness and quality of the design work generated by the department. - Domestic and international travel of up to 10% of time. Leadership: - Establish and maintain employee Goals and Objectives and development plans for the team. - Create, manage, evaluate, and operate within project and department budgets. - Mentors and trains engineers and technicians to improve their creativity and thoroughness. - Supports the management of engineering demand forecasting. - Supports the development of plans for ESC strategic capital investments to align with internal customer needs. - Supports the ESC in completion of Policy Deployment and Continuous Improvement activities aligned with business need. Basic Qualifications: Knowledge, Skills and Abilities: Required: - BS degree in Electrical, Software or Systems Engineering with at least 8 years of experience in the Aerospace Industry. - At least 3 years of management experience in the Aerospace Industry. - Strong experience with Microprocessors, DSPs, FPGA and PLDs development. - Complete avionics development life-cycle: requirements, design, development, integration, and qualification test. - Experience managing a team that has developed, designed and tested according to the requirements of DO-178B Level A. - FAA/EASA software certification and audit experience. - Critical competencies: Customer Focus, Drive for Results, Managing and Measuring Work, Interpersonal Savvy, Commitment to Continuous Improvement, Effective Teamwork, and Planning. Preferred: - Experience with DO160. - Experience with high reliability controller electronics and power switching circuitry - Development of System Description Documents, Certification Test Plans, Common-Mode Analyses, and other documents required for aircraft certification. - System level requirements definition experience taking into account SAE ARP 4754, Fault Tree/System Safety Assessments, FAA/EASA regulations. - Excellent written and verbal communication skills and the ability to work effectively in a team environment are required. Customer interaction and Certification activities for new Air Data System products are critical objectives for this position. You will need to be comfortable in negotiating with Customers and Certification Authorities when discussing requirements for our products. % Travel Required: 20 - 30% ]]>

<![CDATA[Project Engineer / Project Manager – Mechanical KPFF Special Projects Division in Seattle is part of KPFF Consulting Engineers, one of the country’s largest privately held engineering firms, with a staff of nearly 800 engineering professionals and technicians. Our division focuses on development of unique and challenging projects for clients of all types, including Port Authorities, DOT’s, industrial facility operators, manufacturers and other design professionals. Special Projects Division also supports other KPFF Divisions across the country, with specialized technical and project management expertise. Special Projects Division currently has a unique opportunity for a Project Manager with strong technical skills related to machinery design. This is a leadership position with unlimited potential for personal and professional growth. The successful candidate will be experienced in defining and solving problems, and will draw upon a broad design background in machinery design, stress analysis, fluid power systems and process machinery, to lead projects and project teams through concept development, detail design and construction on a wide variety of project types. A partial listing of sample mechanical projects within the last 12 months includes: • Hawaii Superferry vehicle and passenger loading ramps and aprons • Hydraulic platform lifts and scissor type axle lifts for King County Metro’s bus fleet • Custom air / vacuum tooling support system for Boeing • Stress analysis of sea transport fastenings for the San Francisco – Oakland Bay Bridge Self Anchored Suspension Span • Ro-Ro ramp and machinery for conversion of the Foss / Young Brothers barge Kohala for Hawaii inter-island rental car transport • Analysis / repair / redesign of grain spout shiploaders for Port of Seattle • Moving display partitions for the Los Angeles Museum of Tolerance • Mechanical systems for Drydock #2 Caisson Gate at Puget Sound Naval Shipyard • Design of all mechanical systems for WSDOT’s new facility for construction of concrete floating bridge pontoons • New bulk material shiploader in British Columbia The successful candidate will have a BSME or comparable degree and a minimum of 15 years experience. Registration as a Professional Engineer is highly desirable, but if not currently a registered PE, the ability to become registered within one year is required. As a leader of project teams through a broad mix of project types, strong technical competency in the following areas is required: • Design of complex weldments • Stress analysis and design for fatigue • Fluid power systems • Mechanical drives • Cranes, hoists and rigging • Design / specification of bearings, pins and other standard machinery components Technical competency or familiarity in the following areas is considered desirable, but not required: • Kinematic and dynamic analysis of machinery • Industrial process piping • Variable frequency drives • Motion control systems • Materials handling systems The person selected for this position will enjoy a dynamic and challenging project mix, a supportive work environment, and KPFF’s corporate culture that encourages each individual to identify and pursue personal professional interests. Our salary and benefit package is strongly competitive and includes a significant profit sharing bonus plan that rewards individual contribution. Individuals with the above qualifications and interests are encouraged visit www.kpffspd.com and then respond with cover letter and resume to: Company: KPFF Consulting Engineers Contact: Human Resources E-Mail: emp@kpffspd.com Address: 101 Stewart Street, Suite 400 Seattle, WA 98101 ]]>

<![CDATA[I am a freelance drafter. I do architectural drafting, MEP, as-built, conversion of hardcopy plans to CAD,and millwork shop drawings. I follow up for my clients through the permitting process as required. I have my work station and could work to meet tight deadlines. Feel free to call me on 832.335.8375]]>

<![CDATA[Successful candidate will have experience and demonstrated ability to design, develop, maintain and present spatial data. ]]>

<![CDATA[Maintains the physical functionality of facility including guest rooms, public space and heart-of-the-house areas. Responds to guest calls and team member work orders to assess and repair non-functioning machinery and/or equipment. Performs a variety of repair and maintenance tasks including carpentry, plumbing, electric, painting, HVAC and masonry. Inspects guestrooms, public space and heart-of-the-house for needed and preventive maintenance. Records and reports completed repairs and items that need further attention or that require placing a room 'out of order.' Must posess City of Houston 1st grade stationary engineer license.]]>

<![CDATA[Job and Company Description: This position involves installing, supporting, and maintaining automated hardware and software solutions from Health Robotics s.r.l. Health Robotics is based out of Bolzano, Italy, and manufactures i.v. compounding devices and manual compounding assistance software. The company has two automated products; CytoCare for chemotherapy compounding, and i.v.Station, for non-hazardous drug compounding. The products are able to prepare i.v. mixtures aseptically in an ISO-5 rated clean room environment. Additionally, Health Robotics has developed i.v.SOFT, a program and portable unit designed to assist and provide greater levels of accuracy for the manual compounding process. Please visit www.health-robotics.com for a detailed look at the products being manufactured. The available position is for support and care of i.v.Station and the software solution i.v.SOFT. The company is recognized globally as the supplier of superior automated products, and the U.S. market is emerging as a key player in current and future business ventures. The person selected to fill the position will be an integral asset in the development and success of Health Robotics’ products and has an exciting opportunity to work in the cutting edge of pharmacy automation. Main Responsibilities: The clinical robotics engineer performs four main duties: 1. Perform field installations, initial go-live support and user training of new sites and products. This could constitute travel up to 50% to remote locations. 2. Provide field engineering support for dedicated customer sites on an on-call basis for emergency functions as well as preventative maintenance 3. Provide field statistics information to development teams in Italy 4. Provide engineering consultations to new customer sites prior to robot installation Engineering support includes diagnosis and mechanical/electrical maintenance of robotic parts and peripheral sensory devices as well as precision motors and identification systems. It also includes software and parameter maintenance/analysis to ensure the highest possible levels of prescription throughput. Will also work with development teams to test new software or hardware updates. Will also serve as the first point of contact between hospital staff and Health-Robotics. Written documentation of most service actions and statistical information will be required to be maintained/updated regularly. The ideal candidate will be able to work well independently with little guidance. It is necessary to be extremely detail oriented and thorough to ensure success in this position. Good team communication skills are also necessary to collaborate and work with fellow field engineers at times. This position will be based out of Houston, Texas, and this region will be the engineer’s primary base, with the possibility of travel to other regions of the U.S. as installation schedules and maintenance requirements demand. Requirements: • BS in engineering discipline (preferably Biomedical, Electrical, or Mechanical) required • 2-5 years experience in clinical or automated environments • Firm understanding of basic biology and chemistry. • Excellent communication and customer service abilities • Proficient with MS Office • Proficient with remote connections and working with remote support assistance Other Characteristics Necessary to Do Job • Must have a very strong ability to troubleshoot and think critically about new situations as they arise • Must have excellent verbal and written communication skills, both to a technical and non-technical audience • Must be able to adapt to a wide variety of problems and be able to apply a wide variety of knowledge bases to find solutions to problems • Must be flexible • Must be self-motivated to independently troubleshoot and repair complex electrical and mechanical problems. • Ability to read and understand electrical schematics and mechanical drawings • Must be a team player • Attention to detail • Ability to lift/move at least 50 pounds]]>

<![CDATA[We have an immediate need for engineers and designers with 10+ years experience in the following areas: · Process Design · Process Systems · Instrumentation & Controls · Electrical · Civil/Structural · Piping Design EPC company project background on small to medium size chemical plant revamp type project experience preferred. These are contract positions in Houston, Texas. If interested, please send your resume to resume@pgsengineering.com and indicate discipline in subject line of email.]]>

<![CDATA[ Headquartered in Houston, Texas, Bob Johnson & Associates is a full-service water treatment company with 40 years of experience in water treatment systems with a full range of products to treat water & waste water. Services include complete system design, fabrication and system construction, on-site installation and service after the sale. "At Bob J. Johnson & Associates, Inc. we strive to serve our clients and our prospective clients, to contribute to our industry, to provide only products and services that protect our environment and utilize energy and resources efficiently, to provide a rewarding work place for our employees, to behave as a good corporate citizen and earn a reasonable return for our shareholders." The Engineering Project Manager’s role is to plan and coordinate the engineering projects for clients, while maintaining project costs within budget, schedules and “quality of work”. Develops and maintain good business relationships with clients. Assists in the preparation of cost estimates and proposals, consults with engineering on specifics of equipment/system design, sizing and specifications. Manages all phases of projects execution, including design review, procurement of materials, scheduling, and supervision / coordination during fabrication, assembly of equipment and installation / commissioning. May require some travel to job site. Skill set should include knowledge of pumps, filters, membrane systems, piping, instruments, etc. AutoCAD skills are preferred. Candidate should have 5 plus years experience in industrial project management. Candidate must be a strong team player and have excellent written, and oral communication skills. Prefer water / wastewater treatment process experience in the integration of water treatment systems for a wide variety of needs and uses; boiler feed water, ultra pure water, and potable water systems. Must be capable of handing multiple projects. Engineering degree a plus. Company benefits offered: Equal opportunity employer 98% Company paid Medical, Dental, Life and Short Term Disability. Paid vacation and Holiday – We provide a 401K program for your added security and benefit. ]]>

<![CDATA[We are a Houston based commercial construction subcontractor that provides industry-leading waterproofing services to select General Contractors Due to tremendous opportunities, we are currently accepting resumes for a talented Project Manager/Estimator. As a valuable team member, you will work closely with management to ensure that company goals and missions are met. The selected candidate will be responsible for the following: Project Manager / Estimator - Construction estimating, project management and sales of new projects; - Profit and loss and cost control; - Following the Bid Schedule and responding to customer request for bids - Quality interaction with customers, vendors and staff; - Development of a customer base and repeat business relationships; - Following bidding and selling practices established by the company; - Contract and Company Administration to include reviewing all agreements of jobs personally closed to ensure that the scope of work bid matches terms and conditions of the contract; - Coordination and management of project set up and start up, pre-job conferences, job site meetings, submittals and all project management activities; - Ensure construction is performed in accordance with plans and specifications as well as completed in accordance with all company safety policies and procedures; - Review and approval of weekly work reports and other project expenses; - Perform other related duties as required to ensure a safe workplace, quality construction and timely completion of each project; - Enforcement of all company policies and procedures, including Safety and Quality Control; and - Additional duties as directed by company management specific to the position. The ideal candidate will have the following: - 2+ years construction experience as a Project Manager, Estimator, Engineer or similar within a commercial construction company environment (General Contractor or Specialty Contractor) - Must have experience in Commercial Construction Estimating - Must have experience in project scheduling and coordination, project management, and general construction practices - Outstanding communication and interpersonal skills are a must - Highly Organized, motivated self starter with the ability to set and attain goals - Bi-Lingual a plus - Must be dependable with a stable work history - Must be proficient with Microsoft Word, Excel, PowerPoint, MS Office, and the internet (web based applications) - Strong technical and problem solving skills - Must have ability to manage and adapt to change in a fast paced construction environment - College degree in Construction Sciences, Construction Management, Engineering or related field is required for this position. This is a full time, salaried position. We have an excellent benefits program including insurance coverage (Medical/Dental), 401K, truck allowance, and an outstanding bonus program. A college degree with a construction background is required for this position. Must be able to pass pre-employment drug test and sign a non-compete agreement. Only qualified candidates will be contacted. Please send your resume and salary history to info@waterproof.pro. No phone calls please. EOE ]]>

<![CDATA[Electrical engineer with heavy controls experience. The Engineer needs to know how to program PLC’s and be able to develop ladder logic for the program. Power distribution systems, load sharing and shedding systems as well as automation systems. 3-6 Weeks in Calgary, Canada - Must be able to leave immediately! Then you will go to Mobile Alabama for another 4-5 month project Pay is OPEN $$ Please send resume today! michelle@flexicrew.com ]]>

<![CDATA[Seeking a bilingual (spanish / english), technically competent, hands-on person with an extraordinary work ethic to manage all facilities at a 18 acre boutique hotel. In additional to performing repairs and routine maintenance yourself, you will solicit bids, schedule and supervise all contractors providing property maintenance. Knowledge of electrical, HVAC, and plumbing systems is essential. Experience maintaining swimming pools, fountains, physical fitness equipment, AV equipment, and a back up generator is preferred. Experience maintaining an exceptional property is preferred. To apply, please provide a resume outlining work experience and skill set. As the position is out of the area, reasonable relocation costs will be paid.]]>

<![CDATA[The EIC, the UK’s leading trade association for companies supplying capital goods and services to the energy industry, is looking to fill the role of North and Central America Business Information Officer in our Houston office. This is a full time position with generous salary and benefits and is located in the Westchase area of Houston along Westheimer Rd. The salary for this position will range from $45,000 – 55,000 depending on experience. The primary function of the Business Information Officer is to research, update and maintain energy project information in our proprietary database. The individual will research and obtain this information from a variety of sources including: • Contacts at the major energy operators, contractors and sub-contractors • Industry journals and publications • Governmental and regulatory filings • Media and other news sources • Other applicable resources Other responsibilities and duties for this position are as follows: • Attend seminars, conferences and workshops covering new projects and/or other relevant topics • Keeping up to date on the legislation and political activity relevant to the sector within the applicable national and regional governments • Respond to enquiries and requests for additional project information from EIC members • Create and distribute the monthly Newsbrief covering the main project information for the region in a given month • Provide material for the Regional Manager North & Central America to write Regional Comment section of monthly newsletter • Assist with member events when necessary • Provide office administration assistance as and when necessary • Attend networking events and conferences either as an exhibitor or delegate The basic requirements for this position include: • Applicable educational background with at least a 4 year degree from an accredited institution • Strong understanding of the energy industry, specifically capital projects procurement and supply chain • Ideally the candidate will have experience working with the large oil and gas operators and/or EPC firms • Ability to communicate with engineers and technical personnel at member companies • A customer service attitude • Strong planning and organizational skills and the ability to work independently or with little direction ]]>

<![CDATA[Engineering firm in Galveston, TX is seeking a young, energetic inspector to perform roof, siding, window, and door inspections for windstorm certification. Prior windstorm inspection experience is desired, but not required. Must be physically able to climb on roofs and ladders, have reliable transportation, strong technical aptitude, and work independently. Candidates with prior experience in real estate inspection, construction estimating, property insurance adjusting, or roofing inspection are encouraged to apply.]]>

<![CDATA[2H Offshore Inc. in Houston, TX has an opening for a Principal Integrity Engineer to support an ongoing integrity management program for offshore risers, pipelines and associated subsea equipment. Primary responsibilities are: • Act as discipline expert in the field of riser and pipeline integrity; • Input into and technical review of risk-based integrity assessment for offshore risers, pipelines and associated equipment; • Development of inspection work packages; • Technical review of inspection findings and inspection reports; • Identification, assessment and categorization of anomalies and other integrity issues; • Review and assessment of condition monitoring parameters; • Review and approve periodic integrity status and condition assessment reports; • Provide recommendations for ongoing integrity management mitigations including identification of new technology, ensuring continuous adherence with industry best practices. • Facilitate client risk assessment workshops The ideal candidate would have the following: • Bachelors or Master’s degree in mechanical engineering, ocean engineering, or a related discipline; • At least 10 years of relevant industry experience in oil and gas pipeline integrity management, including engineering experience in both an office and an operational capacity. A solid understanding of offshore oil and gas production facilities and subsea systems is a must; • Excellent verbal and written communication skills; • Able to provide input into integrity support of projects involving criticality studies, integrity reviews and root cause analysis, including acting as the technical lead in failure investigations; • A detailed working knowledge of codes and standards including applicable state and federal regulations; • Fully knowledgeable in the processes of risk-based integrity assessment, pipeline monitoring systems, pigging, cathodic protection and corrosion; • Fully knowledgeable of all relevant pipeline failure modes and mitigations, as well as, current industry best practice for inspections, failure mitigations and monitoring; • Ability to lead in-service inspections and fitness-for-purpose evaluations; • Adept in continuous appraisal and improvement of integrity management processes; • Living in, or willing and able to relocate to Houston, Texas; • Professional Engineer, Chartered engineer or equivalent is preferred. About Company 2H has pioneered the development and implementation of integrity management processes for deep water risers, flowlines, moorings, conductors and subsea equipment. The company’s key strength is its people. We are a determined team with backgrounds covering a range of disciplines and expertise. Our professionalism and passion for engineering have enabled 2H to become a leader in our field, and each of us takes pride in the part we play in the company’s success. We have a strong work ethic, but we also believe that our high morale and great sense of team spirit play a big part in our success. 2H is a fun and friendly place to work, and we emphasize the importance of communication and interpersonal relationships through collaborative projects, team work, team building and other group activities. We are always seeking bright, talented individuals who can rise to a challenge and help us apply new ideas to real life industry problems. In return, we provide our high caliber recruits with the support, training and freedom to allow them to achieve their full potential, quickly develop a career path, take responsibility, flourish and grow with the company.]]>

<![CDATA[2H Offshore Inc. in Houston, TX has an opening for an entry level Integrity Engineer to support integrity management of subsea oil & gas production facilities. Person will be part of a team responsible for the execution of integrity management processes on subsea equipment, flowlines, risers, hull, and moorings. Excellent verbal and written communication skills are a must. Requirements are BS or MS degree with at least a 3.0 of 4.0 GPA in one of the following undergraduate or graduate degree programs: • Civil Engineering • Structural Engineering • Mechanical Engineering • Naval Architecture • Ocean Engineering • Aerospace Engineering • Electrical Engineering • Mathematics • Physics Job duties will include working in a project team to implement integrity management processes; inspection & monitoring activities covering planning, enactment & reporting; performing risk based assessments including compilation of mitigation plans, inspection work scopes and procedures; gather and analyze field data; conduct engineering technical studies and analysis in support of threat evaluations and integrity assessments; and go on periodic offshore trips to support inspections. ]]>

<![CDATA[Inspector-Woodlands area - at least 4-5 years experience with land development, utilities, drainage, paving and infrastructure projects. Experience with water and/or wastewater treatment plants and plan and profile drawings a plus. We offer a comprehensive benefits package, which includes a 401(k), paid holidays and vacation/sick time. Qualified candidates should submit their resumes and salary history by responding to this ad. ]]>

<![CDATA[CQC Systems Manager needed for the Huntsville, TX area Position requirements: Engineer, Architect, or Construction Management Graduate Minimum 5 yrs construction experience in projects such as: USACE, Army Reserve Centers, CDC's, etc. Please email resume & references to qualcontrolmanager@gmail.com Please reference the code "CQC" in the subject line.]]>

<![CDATA[Product Designer for Ftiness Equipment and Fitness Accessories Detailed Oriented Motivated Benefits: Experience in Fitness equipment design or other applicable fields Experience in Design of consumer products Understanding of biomechanics]]>

<![CDATA[RESERVOIR ENGINEER - Location: Austin, TX Full time position offering a complete benefit package Responsibilities: • Reservoir management including volumetric and pressure transient analysis to estimate reserves and characterize various reservoirs • Perform nodal analysis studies to optimize artificial lift methods on operated wells • Perform decline analysis and reserve determination • Complete economic runs to determine the viability of various farmout and acquisition scenarios • Coordinate core analysis and PVT analysis on developing plays Experience and skills required: • BS in Petroleum Engineering, Mechanical Engineering or Chemical Engineering • Minimum of 15 years of industry experience with a minimum of ten years in applicable reservoir engineering positions and duties. • Must be able to work autonomously and identify as well as develop and execute various reservoir projects. Must also be able to work in conjunction with production and drilling departments in identifying drill candidates and well optimization candidates • Experience with WIM, Prosper, Aries and Powertools a strong plus RESERVOIR ENGINEER - Location: Tulsa OK Full time position offering a complete benefit package Job Responsibilities: • This employee must be able to demonstrate proficiency in the following software packages: Peep, Microsoft Excel, Microsoft Word, and other standard engineering applications. • The employee must be self directed and capable of working in a small team environment along with other Engineers and Geoscientists. • Excellent communication skills. • Adept at interaction with a variety of contacts, internal and external, including management, industry partners and financial institutions Requirements: • B.S. Degree in Engineering (Preferably Petroleum Engineering). • Minimum of five years of recent industry experience in Reservoir Engineering. • Expertise in the exploration process in a growth oriented environment. Please email resumes to jobs@aechou.com or call us at (281) 669-0620 ]]>

<![CDATA[Allpoints Survey is looking for highly motivated personnel to fill the following positions: * CAD Drafters * Field Crew ]]>

<![CDATA[ Need plans for lease space build-out that can pass Harris County plan checking. Two projects: Office plans, and Teen club plans. Also need Engineering plans ]]>

<![CDATA[Job Purpose: Layout of stainless sheet metal components of food counters and sinks in CAD/CAM by analyzing requirements; referring to blue prints; interfacing with other designers, architects, for the manufacture of industrial kitchen equipment. Duties: * Develops sheet metal projects by analyzing work orders, prints, and completed assembly; calculating requirements; determining appropriate methods; provide shop drawings and layout flats for Brake, shear and punch operations; for fabricating commercial kitchen counters and sinks. * Prepares mechanical drawings using CAD and programming sheet metal CNC equipment using CAM. * Prepares supporting information by developing bills of materials; standard parts, and fasteners. * Modifies drawings by analyzing, resolving, and incorporating changes * Resolves discrepancies by collecting and analyzing information; conferring with architects. * Documents work by recording data and drawings; updating databases. * Complies with legal requirements by adhering to codes and regulations. * Updates job knowledge by participating in educational opportunities; reading technical publications . * Accomplishes manufacturing and organization mission by completing related results as needed. * Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Skills/Qualifications: Sheet Metal Layout , AutoCAD, ProE, CAD/CAM, Drafting, Drafting Tools, Requirements, Analysis, Design Skills, Conceptual Skills, Presentation Skills, Functional and Technical Skills, Thoroughness, Analyzing Information]]>

<![CDATA[Growing National/International Architectural/Engineering and Construction Consulting firm, founded in 1990, with a diverse practice in forensic engineering for commercial, residential, manufacturing properties seeks a contract Senior Civil Engineer with a minimum of 20 years of experience in civil/site design including concept site layout, subdivision design, zoning research and analysis in our branch office in Houston, TX. Expertise This talented professional must be able conduct residential, and commercial site development investigations to determine the cause and origin of civil failures, damages or defects. Investigate and assess damages to civil structures due to catastrophes such as windstorm damage, hurricanes, floods, explosion and fire. Provide detailed reports outlining the cause and origin and costs of the damages to clients. This individual will have client interaction on a regular basis, including marketing of services. This individual will be called upon to provide expert testimony in depositions and a court of law. Position Requirements: • Minimum of B.S. in Civil Engineering from an accredited university • Minimum of 15 years experience in the design and management of Civil engineering infrastructure projects. • P. E. (Professional Engineer) licensure (by examination) in Texas • Advanced degrees and multiple state licensing preferred • Extensive knowledge in site development engineering, water systems, wastewater systems, storm water system analysis, hydraulic modeling • Familiarity with codes, standards, requirements, and local jurisdictional requirements • Familiarity with Drainage Software – StormCAD, Hydroflow, HydroCAD • Some travel within US and Caribbean based on client needs • Strong oral and written communication skills • Excellent project management skills Physical Requirements: • Ability to lift 40 lbs. • Ability to climb ladders • Ability to maneuver in and around buildings and in confined spaces • Ability to drive to site locations Send resumes and salary information. EOE.]]>

<![CDATA[Growing National/International Architectural/Engineering and Construction Consulting firm, founded in 1990, with a diverse practice in forensic engineering for commercial, residential, manufacturing properties seeks a contract Senior Mechanical Process Engineer with a minimum of 20 years experience in the operation, design and construction of petroleum refining, petrochemical, LNG, Gas Processing and chemical processing in our branch office in Houston, TX. Expertise This talented professional must be able to conduct and manage investigations to determine the cause and origin of failures, and resulting damages, in oil and gas facilities as well as offshore platforms. Investigate and assess damages due to catastrophes such as explosions, fires, design errors and equipment failure. It would be a plus for this individual to have experience in managing and scheduling after a catastrophic plant failure. Provide detailed reports outlining the cause and origin of the damages to clients. This individual will have client interaction on a regular basis, including marketing of services. This individual will be called upon to provide expert testimony in depositions and a court of law. Position Requirements: • Minimum of BS degree in Engineering preferably Chemical or Mechanical from an accredited university • P. E. (Professional Engineer) licensure (by examination) in Texas • Advanced degrees and multiple state licensing preferred • Over 20 yrs of professional engineering experience in the petrochemical industry • Proficient in design and operation of ethanol and or methanol facilities • Process Modeling experience is preferred • Familiar with codes and standards such as API, DNV • Some travel within US and Caribbean based on client needs • Strong oral and written communication skills • Excellent project management skills Physical Requirements: • Ability to lift 40 lbs. • Ability to climb ladders • Ability to maneuver in and around buildings and in confined spaces • Ability to drive to site locations Send resumes and salary information. EOE.]]>

<![CDATA[Project Manager A Houston Based Environmental Consulting Firm, at Beltway 8 & Hammerly, has an immediate opening for a Texas Licensed Asbestos & Lead Inspector & Asbestos Consultant. Qualifications: Organized Self Starter must be able to work with limited supervision, able to complete projects in a timely manner on budget. Benefits: -We offer competitive salaries, Health Benefits, paid vacation, sick days -Salary Based upon Experience Attn: Human Resources EOE ]]>

<![CDATA[Firm providing Construction Management (Owner’s Representative) services to the federal government is seeking Project Managers, Construction Inspectors, and Resident Engineers with specific experience working for or with the US Army, Corps of Engineers. The projects to which candidates will be assigned will be in Texas. Prior experience working with or for the US Army, Corps of Engineers is mandatory. Seeking: <ul><li>Project Managers</li> <li>Construction Inspectors/Quality Assurance Representatives</li> <li>Resident Engineers</li></ul> Please attach a copy of your resume and relevant projects list. Apply via our website at <a href="http://cha.catsone.com/careers/index.php?m=portal&a=details&jobOrderID=171187" rel="nofollow">http://cha.catsone.com/careers/index.php?m=portal&a=details&jobOrderID=171187</a>]]>

<![CDATA[A well regarded, growing Engineering Consulting firm has an immediate opening in our Houston office for a Project Manager for Onshore Oil & Gas Pipeline projects. The ideal candidate will serve as the primary contact with clients and direct, evaluate and coordinate all aspects of the design and design support teams. Experience on natural gas pipeline projects is a must with additional experience on crude and/or CO2 projects preferred. Excellent written and verbal skills are required along with a minimum of 10 years experience in oil & gas pipeline design and 5 years project management experience. A BS in engineering from an accredited college or university and a PE are also required. Location: Houston, TX Compensation: ***We offer competitive salaries, exceptional work environment, and excellent benefits including health, dental and vision coverage, 401k, cafeteria plan and flextime. *** Principals only. Recruiters please don't contact this job poster. Please, no phone calls about this job! Please do not contact job poster about other services, products or commercial interests. ]]>

<![CDATA[I'm trying to build a team of Commercial Electrical Estimators for Local Company. We are opening an office in the 290 / 1960 area by March 1, 2010. Accubid estimating software experience a plus. Need to have knowledge of NEC code and know electrical materials used in commercial construction. This is a direct hire full time job. Please reply to mto.express@ymail.com with comments and resumes.]]>

<![CDATA[Description of Project Designer/ Architect This challenging and fast paced position will require personable candidates with experience in design of mixed use and retail facilities, drawing, sketching, and preparation of design presentation drawings. The candidates must have the ability to create design concepts and continue the development through all design phases.This candidate will work hand in hand with developer and must have ability to produce 3D renderings and models to take project to market. Prior experience working for an Architectural consultant or related firm is required. The candidates should have extremely strong inter-personal skills. Aggressive, client oriented personalities with a knack for creative problem solving will succeed in this position Candidate Requirements - Project Designer/ Architect A minimum of 5 to 10 years experience. Must have at least a Bachelor of Architecture. Proficient in Autocad, Photoshop, Sketchup, 3D Rendering Software, and Microsoft office. Proficient in creating Models for presentations. Strong organizational skills. Ability to work well under pressure, juggle and prioritize multiple projects and adjust work accordingly, often against tight deadlines. Excellent oral and written communication skills. Ability to interact with senior management, external client organizations and vendors. Must be quality minded and self motivated. Please email Salary Requirements along with with resume.]]>

<![CDATA[The Director of Engineering for a growing national company is looking for two Mechanical Engineers with oil industry experience to immediately join the Engineering department. Ideal candidates will have experience in at least one of the following: - Drilling and/or Production Riser systems - Liner Hanger Applications - Subsea Wellheads - Design of Subsea Christmas Trees - Subsea Production Manifolds - Oilfield Surface Wellheads Full Benefits! Some travel may be required. Relocation assistance available ]]>

<![CDATA[Our client is looking for a CAD Drafter III to join their team for a contract-to-perm opportunity. Position Title: CAD Drafter III Position Purpose: Prepares and maintains the most complex engineering project design layouts, production drawings and other related documentation per ANSI/Schlumberger standards completely and accurately considering methods of manufacture, tolerance, and their effect on related parts. A minimum of seven years on-the-job experience in mechanical computer aided design/drafting (CAD) system. High school graduate with two-year technical school certificate in mechanical drafting/design or equivalent . MUST BE proficient on ProEngineer Wildfire 2.0 or higher CAD software, 5000 hours of ProE experience is considered a MINIMUM.. Possesses an understanding machine part manufacturing processes and techniques. Must be able to conduct tolerance studies and be experienced in designing close tolerance machine parts. Must be able to work with bill of materials and assembly process for machine designs. Prepares the most complex original mechanical and average complexity electrical/electronic design layouts using the CAD system under minimal direction of the project engineer on a consistent and competent basis. Directs the activities of the engineering documentation group on specific occasions as required by the group supervisor . Possesses total understanding of ANSI, GD&T drafting methods, standards and procedures. Assists with the training of CAD Drafter I and CAD Drafter II personnel in drafting and interpretation of ANSI standards and procedures. Maintains accurate status reports on all projects assigned. Effectively coordinates with interfacing personnel and/or groups, and provides timely updates to the group supervisor. Educational Requirements: * A minimum of seven years on-the-job experience in mechanical computer aided design/drafting (CAD) system. * High school graduate with two-year technical school certificate in mechanical drafting/design or equivalent. Supervision: General Supervision Required Pay Range: $30-40 per hour (DOE) REQUIREMENTS: • MUST HAVE ProEngineer Wildfire 2.0 or higher (5000 hours of ProE experience a MINIMUM). • MUST HAVE Mechanical Aptitude (candidates will be interviewed on this); particularly looking for candidates that posses mechanical hobbies and/or have intrinsic mechanical experience (and LIKE IT), passionate about mechanical design (for example: rebuilt an engine as a side hobby). • MUST HAVE / SHOW Drive and Initiative. Manager prefers candidates with long tenured past and present experience (preferably at least 4 yrs with each position). • This is a Temp to Perm opening and they are looking for serious, dedicated candidates, someone that enjoys mechanical design and has the experience to prove it. • NO past SLB experience. Please forward your resume to Meredith Bowman at meredith.bowman@us.randstad.com for immediate consideration. Thank you!]]>

<![CDATA[Galveston Texas based marine fabrication company is looking for an inhouse licensed Structural Engineer. We specialize in Offshore Living Quarters, MCC Buildings, Control Rooms & Helidecks. Qualifications Desired: PE License (Registered - Texas) 10+ years experience in Structural Steel Design Experience with FIE Analysis (StruCad / SACS) Experience with Blast Resistant Building Design Experience with Corrugated Steel Building Design Easy commute to Galveston with little traffic and competitive salary. Send Resume to SteveV@LoneStarMarineShelters.com (409) 941-1200 - Steve Vacker ]]>

<![CDATA[Wind Power Project Development Engineer, Houston TX Company Overview Pattern Energy Group LP (Pattern) is an independent, fully integrated energy company that develops, constructs, owns and operates renewable energy projects and transmission assets across North America and parts of Latin America. The primary focus is on wind and transmission, with limited investments in solar and thermal. Pattern Energy Group, LP is charting significant growth in 2010 with more than 3,000 MW of wind assets in eleven states and four countries in their development pipeline. Pattern Energy Group is a dynamic company. The corporate philosophy is that of a very flat, collaborative organization without significantly encapsulated roles or titles. Everyone has a place at the table. Teams pull together their individual and collective strengths to learn from each other and produce extraordinary results time and time again. It’s an exciting professional environment in an industry that’s exploding with growth. Pattern Energy offers an unparalleled opportunity to learn, grow your career while contributing to the future health of the planet. The Opportunity As the Wind Power Project Development Engineer you will be part of the Engineering and Construction Group which is located in San Diego and is lead by the Director of Engineering & Construction. You’ll support the development group in Houston as they prospect, define and develop wind power projects through construction commissioning and operations. Pattern utilizes outside engineering expertise. One of the primary responsibilities is to be a liaison with consulting engineers and vendors whose technical input is needed in the development process. The work effort requires close coordination with, and full implementation of, the policies and practices of the E&C Group. Facilitate the technical engineering analysis of development and construction issues associated with the feasibility analysis of potential wind farms, including: • Site constructability and access • Preliminary layouts for site roads, collection systems, turbines & substations • Utility interconnection and technical requirements of power purchase agreements • Local utility services to support both project construction and operation • Geotechnical and geophysical studies • Support of permit activities and evaluation of impacts to construction • Construction cost estimates Provide technical support of ongoing construction, project management, and procurement activities, including: • Development and review of technical exhibits for turbine supply agreements and balance of plant (BOP) agreements • Development and review of specifications for the procurement of specific wind farm components • Resolution of technical issues, including responses to RFIs (requests for information) submitted by contract counterparties • Assistance with maintenance of the cost estimating data base • Support of BOP contract bid solicitations and evaluation of proposals • Tracking of financial budgets and milestone completion objectives • Provide technical support in resolving issues at currently operating wind farms. • Maintain development project records and E & C department standard documents Primary Requirements • 5-10 years engineering experience in the electric power industry • Wind farm design or construction experience preferred. Work with major turbine suppliers will be considered. • Demonstrated ability to communicate engineering concepts effectively to a multi-disciplinary audience. • Proven ability to apply solid engineering principles in real world circumstances. • Experience and interest in the financial constraints and ramifications of engineering decisions. • Field engineering experience considered a plus. • Well developed diplomatic, oral and written communications skills. • Proficient with MS Office including Excel, Word, PowerPoint and MS Project. Familiarity with AutoCAD considered a plus. Educational/Travel Requirements • BS in Engineering, Electrical or Mechanical • 15% travel Compensation/Benefits • $70,000 - $90,000/year depending on experience and education • Full benefits eligible. Discretionary performance based bonus eligible Send confidential resume to Pattern Energy contracted recruiter jobs@gt-connections.com PATTERN ENERGY GROUP LP IS AN EQUAL OPPORTUNITY EMPLOYER ]]>

<![CDATA[Seeking RPLS or SIT min. 5 years experience in ROW Mapping, Construction Staking, TXDOT certificate desirable, with Advanced Experience CALCS. Please fax or email your resume to 713-784-7733 or hr@geosurvinc.com * Location: SW Houston * Compensation: commensurate with experience Location: Greater Houston Area Principals only. Recruiters, please don't contact this job poster. Please do not contact job poster about other services, products or commercial interests. ]]>

<![CDATA[We are looking for writers/editors in the Houston area with experience developing, recently, oil and gas articles for publication. Jobs require content development with scientists and engineers, and a highly organized thought process with the ability to write clearly and succinctly to both nontechnical and technical audiences. Some projects require being onsite, others do not; please specify requirements as well as resume, rate, and recent sample(s).]]>

<![CDATA[ <ul> <li>Perform structural calculations using empirical formulae from Classification Regulations as well as from first principles. </li> <li> <div>Assist in the development of models for FE analysis and have the ability to carry out analyses after completion of training in the selected software and analytical tools. </div> </li> <li> <div>Prepare structural drawing packages for submission to Classification Societies with limited input from PM or other structural resources within the office.</div> </li> <li> <div>Assist in the preparation of weight estimates with a focus on structural weight estimating</div> </li> <li> <div>Prepare vessel arrangements for marketing and proposal efforts displaying knowledge of SOLAS and regulatory body requirements</div> </li> <li> <div>Perform stability and power prediction calculations to support proposal and project efforts.</div> </li> <li> <div>In addition to performing discrete technical tasks within larger projects may perform assist in project management.</div> </li> <li> <div>Be cognizant of certain aspects of the management of the project, including, but not limited to, the following: establishing realistic working budgets, deliverable deadlines, budget tracking & analysis, prioritize and coordinate project schedules.</div> </li> </ul> <img src="http://www.jobtarget.com/c/includes/jvimg.cfm?site=7&job=6500143"> <ul> <li> <div>Minimum 5-7 years Naval Architecture experience.</div> </li> <li> <div>Diploma or higher qualification from a recognized maritime institute.</div> </li> <li> <div>Excellent working knowledge of Autocad and MS Office.</div> </li> <li> <div>Experience with ShipConstructor software preferred but not essential.</div> </li> <li> <div>Familiar with Class, US and international regulations, including USCG, CFR, SOLAS, MARPOL, IACS, ILC.</div> </li> <li> <div>Ability to work independently or in a large project team.</div> </li> <li> <div>Proficiency in English, both written and verbal.</div> </li> <li> <div>US Residency/Citizenship preferred.</div> </li> </ul> To apply, email mike.carroll@stxeurope.com]]>

<![CDATA[<ul> <li>Perform engineering calculations using empirical formulae from Classification Regulations as well as from first principles. </li> <li>Perform HVAC calculations according to recognized marine standard criteria.</li> <li>Prepare mechanical/diagrammatic drawing packages for submission to Classification Societies.</li> <li>Prepare machinery arrangements taking into account all systems requirements.</li> <li>Prepare propulsion driveline / shafting arrangements.</li> <li>Have adequate knowledge of marine engineering and systems to ensure the functionality of the equipment required for a vessel.</li> <li>Minimal travel requirements.</li> <li>Competative Salary and benefits.</li> </ul><img src="http://www.jobtarget.com/c/includes/jvimg.cfm?site=7&job=5928638"> <ul> <li> <div>Minimum 5-7 years marine systems design experience.</div> </li> <li> <div>Diploma or higher qualification from a recognized maritime institute.</div> </li> <li> <div>Excellent working knowledge of ACAD 2005 or Higher and MSOffice.</div> </li> <li> <div>Experience with ShipConstructor software preferred but not essential.</div> </li> <li> <div>Familiar with Class, US and International regulations, including USCG, CFR, SOLAS, MARPOL, IACS. </div> </li> <li> <div>Ability to work independently or in a large project team with limited input from Project Manager or other engineering resources.</div> </li> <li> <div>Proficiency in English, both written and verbal. </div> </li> <li> <div>US Residency/Citizenship preferred.</div> </li> </ul> To apply, email mike.carroll@stxeurope.com]]>

<![CDATA[Qualified candidates should have at least 6 to 8 years of highway engineering and roadway construction plan preparation experience utilizing state DOT design criteria, specifications and standards. It is preferred that the applicant be registered as a Professional Engineer in a state within the USA. Candidates should be proficient in Microstation and GEOPAK design packages. Work references are required for similar experience. ]]>

<![CDATA[This position offers you the opportunity to make a significant impact in multiple areas, both right off the bat and over the long term. You'll contribute to just about all areas of engineering, from process improvement to sales, and you'll acquire a high level view of our business. Dominion Building Products provides Man Doors, Aluminum Windows, Canopies and related accessories to the pre-engineered building industry. Dominion continually sets the standard for excellence because Dominion is the only door and window manufacturer that is dedicated solely to this industry. This position is based in our headquarters in Houston, TX, where the cost of living -- including housing -- is below the national average. You'll join the market leader: while our competitors are all regional in scope, we have a national footprint commanding more than 70% of the market. Your success in this role could set you up to pursue career opportunities along a variety of paths within our parent company, $5 billion ASSA ABLOY, the world leader in door opening solutions. You'll leverage your engineering expertise in three key areas: collaborating with operations leaders in implementing lean processes, ensuring our parts drawing database is complete and well organized, and expanding our relationships with our customers through sales engineering activities. To be a good fit for this opportunity you will have solid, broad engineering experience in manufacturing, ideally including both process and sales engineering. We're looking for a professional who can combine their technical savvy with visionary, out-of-the-box thinking as well as a hands-on approach to delivering results. Experience developing and implementing lean processes and a working knowledge of the door and hardware industry is a strong plus. We are an equal opportunity employer -- M/F/V/D. IMPORTANT: HOW TO APPLY: We want you to be as selective as we are! For a detailed 'insider's view' of this position and to submit your resume online, please visit the following URL: <a href="http://cecodoor.jobinfo.com/description.lasso?adid=22124" rel="nofollow">http://cecodoor.jobinfo.com/description.lasso?adid=22124</a> If the link does not work, simply copy the complete URL and paste it into your browser's address line. PLEASE RESPECT OUR RECRUITMENT PROCESS. DO NOT USE ANY OTHER METHOD TO APPLY OR CLICK ANY OTHER BUTTONS. Thank you for your attention to this detail. Additional keywords:process engineer, doors, windows, building products, fabricated metal products, ]]>